Now, at last - automatic flow control without any wire connections to the vehicle! The Radar Syncroflow is Dyna-Fog's most popular truck mount accessory.
Over the years, Curtis Dyna-Fog has been offering the Syncroflow automatic flow control system. Now, the same time-proven technology can be used easier than it ever was before. Utilizing a radar sensor, an electronic signal is sent from the sensor to the road surface and then reflected back. As the vehicle speed increases, the speed of reflected signal also increases. By using the sprayer's own onboard electronics, this signal is converted into electrical pulses that, in turn, control the formulation pump speed without the need for connecting any wires to the vehicle or speedometer system.
By simply changing a toggle switch from Syncroflow to Manual mode, the Syncroflow System can be turned off, and flow can then be manually controlled by adjusting pump output. When in the Syncroflow mode, flow is adjusted to vary proportionately with vehicle speeds from 5 to 20 MPH (8 to 32 km/hr). When the Syncroflow System is switched on, electronic pulses are then fed from the radar sensor to the formulation pump. As the vehicle moves either faster or slower, these pulses increase or decrease in frequency, which, in turn, causes the formulation pump output to proportionately increase or decrease the fluid flow.For purposes of maintaining the highest quality product, manufacturer reserves the right to make technical modifications at any time without prior notice.